TR-Electronic sercos C-58 Serie Benutzerhandbuch Seite 98

RESET – S/IP service
8 RESET – S/IP service
The RESET service serves for rebooting of devices in the network. The devices must be in the
communication phase NRT, CP0 or CP1 (UDP/IP mode).
The RESET is implemented as S/IP service and must be executed with the message type 97. Since
the RESET service interrupts communication, the execution is delayed. The RESET request is not
confirmed by the devices.
 TR-Electronic GmbH 2013, All Rights Reserved
Printed in the Federal Republic of Germany
Page 98 of 103 TR - ECE - BA - DGB - 0105 - 03 08/31/2017