TR-Electronic sercos C-58 Serie Benutzerhandbuch Seite 96

Interfaces of the function group Encoder-Basic
6.3.4 Saving of parameters, S-0-0264
So that changed parameters are saved permanently, command S-0-0264 Backup working memory
procedure command must be executed with the value "3". To reset the command the value "0" must
be written afterwards. At present this parameter is used only internally for the electronic label.
Parameter-Format, Backup working memory procedure command
name
attribute length (octet)
data type and display format
function
positions after decimal point
write protection
conversion factor
scaling / resolution of LSB
unit
minimum value
maximum value
scope of parameter
 TR-Electronic GmbH 2013, All Rights Reserved
Page 96 of 103
Backup working memory procedure command
TR - ECE - BA - DGB - 0105 - 03
procedure command 0x00 03
Printed in the Federal Republic of Germany
2
binary
0
never
1
1
n/a
0
3
local
08/31/2017