TR-Electronic sercos C-58 Serie Benutzerhandbuch Seite 79

5.2.2 IP-Address, S-0-1020
So that a Sercos device as a subscriber at the Industrial Ethernet can be controlled,
this device additionally needs an explicit IP-Address in the network. The IP-address
consists of 4 decimal numbers with the value range from 0 to 255. The decimal
numbers are separated by a point from each other.
The IP-Address consists of
-
-
The IP-Address is set by means of IDN / S-0-1020.
Parameter-Format, IP Address
name
attribute
unit
minimum value
maximum value
scope of parameter
Printed in the Federal Republic of Germany
08/31/2017
the address of the (sub) net and
the address of the subscriber, called host or net node
length (octet)
data type and display format
function
positions after decimal point
write protection
conversion factor
scaling / resolution of LSB
TR - ECE - BA - DGB - 0105 - 03
IP Address
1, variable
unsigned decimal
parameter
0
never
1
1
n/a
n/a
n/a
global
 TR-Electronic GmbH 2013, All Rights Reserved
Page 79 of 103