GB
4.5.2 Changing the battery – battery integrated in control unit
Open the battery compartment lid with the Allen key (2 mm) provided and change the battery.
Diagram 3: Control unit
The battery change contact is activated when the battery compartment lid is opened. Every
time the lock is opened a constant acoustic signal will be heard accompanied by alternate
red/green fl ashing LED. It is imperative to have these signals cancelled. The cancellation
can only be done by the primary code holder (in parallel mode) or by the dual code holder (in
ordinary dual code mode).
Cancellation of signals
1) Press ON
2) Press P
Enter valid primary code (parallel mode) or dual code (ordinary dual
3)
code mode)
4) Press P
5) Press 9
Page 38
82132 Code-Combi B
Kaba Mauer GmbH