Delegated Dual Code Mode Function; Switching On/Alteration Of Dual Code By Primary Code Holder; Opening; Opening With Primary Code By Primary Code Holder - Kaba 82132 Code-Combi B Bedienungsanleitung

GB

4.2 Delegated dual code mode function

4.2.1 Switching on/alteration of dual code by primary code holder

1) Open lock with valid 6-digit primary code (see 4.1.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code
5) Press P
6) Press 5
7) Enter new 6-digit 1
8) Enter new 6-digit 1
9) Enter new 6-digit 2
10) Enter new 6-digit 2
11) Test newly programmed dual code by locking and opening once more
If the new partial combinations are not correctly confi rmed, the signal 3 x
Repeat the sequence from 2).
The correct sequence of the partial combinations and its repeated confi rmation must be
adhered to.

4.2.2 Opening

4.2.2.1 Opening with primary code by primary code holder

1) Press ON
2) Enter valid 6-digit primary code
3) Within 4 seconds turn bar handle clockwise until stop position reached
If the lock was last opened with the dual code, the signal 3 x
Page 30
primary code
st part of combination
st part of combination again
nd part of combination
nd part of combination again
82132 Code-Combi B
dual code
appears.
/ 2 x
1 x
/ 2 x
1 x
appears.
1 x
Kaba Mauer GmbH