Ordinary Dual Code Mode Function; Activation Of Ordinary Dual Code Mode By Primary Code Holder; Opening With Dual Code By Dual Code Holder - Kaba 82132 Code-Combi B Bedienungsanleitung

4.3 Ordinary dual code mode function

4.3.1 Activation of ordinary dual code mode by primary code holder

This action deletes the primary code and replaces it with a dual code. The lock can only be
opened by a combination of the 1
1) Open lock with valid 6-digit primary code (see 4.1.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code again
5) Press P
6) Press 7
7) Enter new 6-digit 1
8) Enter new 6-digit 1
9) Enter new 6-digit 2
10) Enter new 6-digit 2
11) Test newly programmed dual code by locking and opening once more
If the new partial combinations are not correctly confi rmed, the signal 3 x
Repeat the sequence from 2).
The correct sequence of the partial combinations and its repeated confi rmation must be
adhered to.

4.3.2 Opening with dual code by dual code holder

1) Press ON
2) Enter 6-digit 1 st
3) Enter 6-digit 2 nd
4) Within 4 seconds turn bar handle clockwise until stop position reached
The correct sequence of the partial codes must be adhered to. In order to open the lock the
1 st part of the combination has to be entered followed by the 2
Kaba Mauer GmbH
st nd
and 2
st part of combination
st part of combination again
nd part of combination
nd part of combination again
part of combination
part of combination
82132 Code-Combi B
dual code
parts of the code (mutual check principle).
nd
/ 2 x
1 x
/ 2 x
1 x
appears.
1 x
1 x
part of the combination.
Page 33
GB