Alteration Of Secondary Code By Secondary Code Holder; Cancellation Of Secondary Code By Primary Code Holder; Locking - Kaba 82132 Code-Combi B Bedienungsanleitung

4.1.5 Alteration of secondary code by secondary code holder

1) Open lock with valid 6-digit secondary code (see 4.1.1)
2) Press ON
3) Press P
4) Enter valid 6-digit secondary code
5) Enter new 6-digit secondary code
6) Enter new 6-digit secondary code again
Test newly programmed secondary code by locking and opening once
7)
more
If the new secondary code as per 6) was incorrectly confi rmed, the signal 3 x
Repeat the sequence from 2).

4.1.6 Cancellation of secondary code by primary code holder

1) Open lock with valid 6-digit primary code (see 4.1.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code
5) Press P
6) Press 0
By pressing the key combination P and 0 all the functions programmed (secondary code,
dual code, time delay, opening window) are deleted.

4.1.7 Locking

In conjunction with a boltwork: After the door has been closed the boltwork must be locked
and the lock closed.
1) Turn bar handle counter clockwise until stop position reached
Kaba Mauer GmbH 82132 Code-Combi B
GB
/ 2 x
1 x
appears.
1 x
Page 29