Opening With Programmed Td/Ow; Cancellation Of Programmed Td/Ow - Kaba 82132 Code-Combi B Bedienungsanleitung

GB

4.4.2 Opening with programmed TD/OW

1) Press ON
2) Enter valid code
Automatic start of TD: visual signal every 5 seconds
After end of TD: acoustic signal
Automatic start of OW: visual and acoustic signal every 5 seconds
3) Enter valid code once again during OW period
4) Within 4 seconds turn bar handle clockwise until stop position reached
By pressing the P key during the OW period this function is interrupted. The entire sequence
must then be repeated in order to open again.
3 code entries are possible during the TD period. Following the third incorrect entry the entire
process has to be repeated. The TD/OW can be overridden with the override key
(see 4.6 or 4.7).

4.4.3 Cancellation of programmed TD/OW

1) Open lock with valid code
2) Press ON
3) Press P
4) Enter valid code once more
5) Press P
Press 1 when TD/OW is entered for
- primary code in parallel mode
- primary code in delegated dual code mode
6) - dual code in ordinary dual code mode
Press 2 when TD/OW is entered for
- secondary code in parallel mode
- dual code in delegated dual code mode
7) Press 000 (set TD/OW on 0 respectively)
Page 36 82132 Code-Combi B
1 x
1 x
/
1 x
1 x
TD/OW
deleted
Kaba Mauer GmbH