i
It is strongly recommend that two or more person assemble this
Dumbbell bench.
Note: Some of the accessories are pre- tted in the master component,
they may not be supplied separately.
Step 1
A
Attach the Front Support onto the Stabilizer (2#), Align the Holes and Secure
them with 2pcs M10*20 Hex Bolt(14#) and 2pcs Φ10 ARC Washer(15#). Insert
the Lock Pin (8#) to the Main Frame(1#).
B
Attach the Rear Frame(3#) on the Stabilizer(2#),Align the holes and Secure
them with 2pcs M10*20 Hex Bolt(14#) and 2pcs Φ10 ARC Washer(15#). Fix
Rear Frame(3#) by one Hex Bolt M10*75(16#), 2pcs Φ10 Washer(17#), one
Nut M10(18#) and 2pcs Wrench(19#), Adjust the Position by Pulling out the
Lock Knob(9#) and Suggest to Operate this by Two Persons.
GB
ASSEMBLY INSTRUCTION
www.ultrasport.net