Step 2
A
Attach the Front Tube(7#) to the Incline Support(5#) and Secure them
together with 1pce M10*20 Hex Bolt(14#) and 1pce Washer Φ10(17#), Select
the Desired Height with the Lock Knob(9#).
B
Attach the Pad Tube(6#) and Foot Pad Bracket(4#) to the Front Support. Align
the holes and Secure them with 2pcs Hex Bolts M10*75(16#) and 4pcs
Washer Φ10(17#) with 2pcs Lock Nut(18#). Attach the 2pcs Small Foam (11#)
as the diagram shows.
www.ultrasport.net
GB
.