General Risks; Coolant Safety Diagrams - CLIVET MSAN 81 Anleitung Zur Installation, Bedienung Und Wartung

GENERAL RISKS

Particular area
Heat exchanger coils
LP Safety Valves
Area surrounding the
unit
Area surrounding the
unit
Unit internal part
Unit internal part
Inner dangerous area
Inner dangerous area

COOLANT SAFETY DIAGRAMS

01 Identifying elements for Product name: forane 407C
the substance N°SDS 01965/1
Supplier: ELF ATOCHEM ITALIA
Via G.Murat 17, 20159 Milano tel. 02/668111
02 Information concerning
Chemical nature of the compound
composition of
Mixture based on:
components
*
*
*
03 Identification of risk Greatest physical and chemical dangers:
Thermal decomposition in toxic and corrosive products
04 First-aid measures General information:
Inhalation: Carry the victim into the open air. Resort to oxygen or
artificial respiration if necessary.
Contact with skin: Frostbite must be treated in the same way as
burns.
Contact with the eyes: Immediate rinsing in abundant water. If
irritation should continue, consult an ophthalmologist.
Instructions for the physician: Do not administer
catecolammine (due to the cardiac sensitisation provoked by the
product)
05 Fire prevention measures Specific dangers: Thermal decomposition into toxic and
corrosive products. Hydrofluoric acid. Carbon oxides.
Specific means of intervention: Cool containers/cisterns with
jets of water. Prevent any sparks or flames.
Do NOT smoke.
Special protection systems for fire-fighting squads: Carry
breathing apparatus and wear protective clothing
06 Measures to take in case Individual precautions: Avoid contact with the skin, eyes and
of accidental spillage inhalation of vapours. Use personal protection means.
In an enclosed space: ventilate or use breathing apparatus (risk
of anoxia). NO SMOKING ALLOWED
Environment protection precautions: limit waste into
environment with the greatest care.
Danger
Superficial wounds
Wounds
Intoxication
Wounds
Intoxication
Serious burns
Death
Death by:
Serious burns
Intoxication
Burns
Wounds
Death by:
Electrocution
Death by:
Electrocution
Serious burns
Forane 32(difluoromethane) (N° CAS: 75-10-5)
Forane 125 (pentafluoroethan) (N° CAS: 354-33-6)
Forane 134a (1.1.1.2 tetrafluoroethan) (N° CAS: 811-97-2)
Modality
Contact
Refrigerant gas exhaust
due to the intervention of
the safety cut-out.
Explosion due to a rise
in ambient temperature
(fire).
Fire due to short-circuit
or overheating of the
power supply cables
before the unit mains
switch.
Contact with
compressors and
discharge pipes
Contact with sharp
corners
Metal parts under
tension.
Contact with parts under
tension which one can
reach only after having
removed the protective
panels.
Product name: forane 22
N°SDS 0005/7
Supplier: ELF ATOCHEM ITALIA
4 cours Michelet Cedex 42, 92091 Paris, France.
Tel: 00331 49.00.80.80
Chemical nature of the compound
Mixture based on:
Chlorodifluoromethane halogenated hydrocarbon
N° CAS 75-45-6
EINECS 200-871-9
Effects on health: practically non-toxic
Greatest physical and chemical dangers:
Thermal decomposition in toxic and corrosive products
Specific dangers/EEC: Dangerous for the ozone layer.
General information:
Inhalation: Carry the victim into the open air. Resort to oxygen or
artificial respiration if necessary.
Contact with skin: Frostbite must be treated in the same way as
burns.
Contact with the eyes: Immediate rinsing in abundant water. If
irritation should continue, consult an ophthalmologist.
Specific dangers: Thermal decomposition into toxic and
corrosive products. Hydrofluoric acid. Hydrochloric acid in
gaseous form. Phosgene Carbon monoxides (CO).
Specific means of intervention: Cool containers/cisterns with
jets of water. Prevent any sparks or flames.
Do NOT smoke.
Special protection systems for fire-fighting squads: Carry
breathing apparatus and wear protective clothing.
Individual precautions: Avoid contact with the skin, eyes and
inhalation of vapours.
In an enclosed space: ventilate or use breathing apparatus (risk
of suffocation). NO SMOKING ALLOWED.
Remove all risk of sparks or flames.
64
Instructions
Avoid incidental contacts.
Wear protective gloves.
Install coil protective grills (optional).
Avoid to enter the dangerous zone.
Pipe in an appropriate way the safety
exhaust valves.
Wear appropriate clothes and gloves.
Never shut the compressors inlet/outlet
valves when the unit is off.
Exact measurement of cables and safety
cut-outs of the connections to the power
supply line.
Avoid incidental contacts
Wear protective gloves
Wear protective gloves
Put scrupulously to earth the metal parts
of the unit.
Open the unit mains switch and lock it with
a padlock before removing the panels.