Manually Interrupting/Starting The Operating Cycle; Interrupting Operation; Connecting The Device With The Lidl Home App - Parkside PMRDA 20-Li A1 Originalbetriebsanleitung

GB MT
Manually interrupting/
starting the operating cycle

Interrupting operation

Press the STOP button (9) to stop the mow-
er during operation.
Starting/resuming operation
1. Open the cover (1).
2. Confi rm the selection with the OK but-
ton (7).
3. Unlock the display (10) with the 4-digit
PIN (factory setting "1111").
4. Press the start button (3).
5. Close the cover (1) again.
The lawn mower starts the set operat-
ing cycle or resumes its previous activi-
ty without interruption.
Connecting the device
with the Lidl Home App
1. Open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN (factory setting "1111").
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings".
5. Confi rm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select "Ac-
tivate WiFi".
7. Enable Bluetooth® on your smart-
phone.
8. Open the Lidl Home App.
From here there are options

to connect the device.

If this is the device you wish to connect
to the app:
9. On the tab, select the option "Add
device".
68
10. If you select "Go to add", the available
11. Select the device by setting the check
12. Now press the
13. Select your WLAN and enter the corre-
14. Confi rm the successful connection with

If you have already connected other
devices to the app:
9. On the
10. Proceed as with

If a list of available devices is not auto-
matically suggested to you:
If the device is not suggested automatical-
 ,  and ly, follow these steps:
9. On the
10. Select "Other" in the bar on the left.
11. Select "Other 2".
12. Confi rm that the display is fl ashing rap-
The app scans the area for available de-
vices and indicates if available devices
have been found.
If this is not the case, read on if

possible .
devices are displayed in a list.
mark . Select only one device at a
time. If there are other check marks for
other devices, clear the check marks by
pressing them.
, that has the same
colour as the set check mark.
sponding password.
"Finish".
The device is now listed in the
and can be selected.
tab, select the
per right. The app scans the area for
available devices and indicates if avail-
able devices have been found.
If this is not the case, read on if

possible .

tab, select the
per right.
idly.
tab
in the up-
from point 10.
in the up-