Inserting/Removing The Rechargeable Battery; Switching On And Off; Auto/Eco Mode; Checking The Charge Status Of The Battery - Parkside PRMA 40-Li A1 Originalbetriebsanleitung

Inserting/removing the
rechargeable battery
Switch off the apparatus, remove
the ignition key (
for the blades to come to a stand-
still.
1. To remove the battery (9) from the de-
vice, press the release button (9a) on
the battery and pull the battery out.
2. To insert the battery (9), push the bat-
tery along the guide rail into the de-
vice. You will hear it click into place.

Switching on and off

The cordless lawnmower may only
be used with two batteries of the
Parkside X 20 V Team series.
1. Place the apparatus on a level
surface.
2. Lift the cover (
device housing and insert the
charged batteries (9) along the
guides into the device. You will
hear them click into place.
3. Insert the ignition key (10) in the
corresponding opening next to
the rechargeable battery (9).
The ignition key can only be in-
serted in one position. Take note
of the guide groove on the open-
ing next to the battery and on
the ignition key (10) (see small
image
4. Before switching the apparatus
on, make sure that it is not touch-
ing any objects.
5. To switch the
apparatus on, press
the release button
10) and wait
8) on the
).
1
2
(16) and hold it down while
pressing the starting lever (17).
Let go of the release button.
6. To switch the apparatus off, let
go of the starting lever (17).
Due to the intelligent energy man-
agement system, the motor starts
after a delay.
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do
not touch the moving blade.
There is a risk of injury.

Auto/Eco mode

The cordless lawnmower automatically
launches in the last mode used when
turned on. You can switch between Auto
and Eco mode by pressing the Auto/Eco
switch button (20).
Auto mode: the cordless lawn mower
adjusts the motor speed in
accordance with the load.
Eco mode:
the cordless lawn mower
runs at the lowest speed for
maximum battery life.
Checking the charge status
of the battery
The battery charge status indicator (
shows the state of charge of the battery
( 9).
Press the button for the charge level indica-
tor ( 21) on the lower bar.
The charge level of the battery is indicated
by illumination of the corresponding LED
lights.
GB
22)
13