Parkside PMRDA 20-Li A1 Originalbetriebsanleitung Seite 61

Mower is not in the
station
Press the start button
to start
Duration at least 30
minutes
Search for signal...
Copy fi le, please wait
Please switch off
Update failed
Error
Cutting motor blocked
Left motor blockage
Please replace the
battery
Battery abnormal
Battery damaged
Battery temperature too
low (discharge)
Battery voltage too
high
Battery High
temperature
High charging current
High charge voltage
High temperature
Mower lifted
Mower upside down
Mower stuck
Mower tilted
Motor overtemperature
Mower is not in the station, if necessary place the mower in
the station
Press the START button (3)
Indication of the time needed
Lawn mower searches for its signal
Please wait for the copying process
Switch off lawn mower
If necessary, carry out the update procedure again
See chapter "Reading out the work and error log"
see chapter "Removing blockages"; check blade for foreign
objects/defects;
If necessary, contact manufacturer (see "Service Centre")
Replace battery
Cancel charging process
Battery voltage too high
Battery has a high temperature
Cancel charging process, check input current
Cancel charging process, check input voltage
Cancel charging process
Lawn mower was lifted
Set lawn mower upright and restart
Clear the lawn mower and restart
Set lawn mower upright and restart
Switch off the lawn mower and let it cool down
GB MT
61