Herunterladen Inhalt Inhalt Diese Seite drucken

Filling With Petrol; Operation; Starting/Stopping The Engine; Cold Start - Parkside PBM 125 A1 Originalbetriebsanleitung

Benzin-rasenmäher
Vorschau ausblenden Andere Handbücher für PBM 125 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

IE
NI

Filling with petrol

Warning! Petrol is flammable and
harmful to health and the environ-
ment:
-
Store petrol in vessels intended for this;
-
Only refuel in the open air and never
while the engine is running or hot;
-
Carefully open the fuel cap so that
overpressure can be relieved;
-
Do not smoke while refuelling;
Avoid skin contact and inhalation of
fumes;
-
Remove spilled petrol;
-
Keep petrol away from sparks, open
flames and other ignition sources.
-
Dispose of any petrol remnants in an
environmentally friendly way (see "Dis-
posal/environmental protection").
- Do not use any petrol/oil mix-
ture.
- Use lead-free normal or premi-
um-grade petrol;
If using organic fuel, do not mix
more than 10% ethanol.
- Only use clean, fresh petrol.
- Do not store petrol for longer
than one month, as its quality
will deteriorate.
1. Unscrew the tank cap (
2. Add petrol up to the lower edge of the
filler neck (31). Do not fill the petrol
tank fully, so that the petrol has space
to expand.
3. Wipe petrol residues off the tank cap.
4. Close the tank cap.
14

Operation

 9).
1. Press the petrol pump (32)
2. Pull the safety bracket (2) towards
3. Pull the starter handle (24).
4. If the motor starts, slowly release the
Some level of noise emission with
this equipment is unavoidable. Post-
pone noisy work until designated
periods when it is permitted. Take
rest periods when needed and
limit working time to the minimum
necessary. For your personal pro-
tection and the protection of people
working nearby a suitable form of
hearing protection must be worn.
Starting/stopping
the engine
Warning! Petrol is flammab-
le. Start the engine at least
3 m away from where you
refuelled. Possible fire ha-
zard.
Place the device on a solid, even
base, avoiding high grass if possib-
le. Make sure that the cutting tool
does not touch either other objects
or the ground.
For your safety: Stand behind the
device when starting it.
Regularly check the petrol and oil
levels (see "Checking the oil level")
and top up promptly.

Cold start:

(primer) 3x.
the handlebar (1) and hold it.
starter handle into the starter cable gui-
de (25).

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis