Reading Out The Work And Error Log; Checking/Performing A Fi Rmware Upgrade; Charging - Parkside PMRDA 20-Li A1 Originalbetriebsanleitung

GB MT
5. Confi rm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select "Fac-
tory settings".
7. Confi rm the selection with the OK but-
ton (7).
The lawn mower switches off
and resets itself to the factory
setting.
Resetting the lawn mower to factory
settings does not delete the personal
data saved when connecting to the Lidl
Home App. To delete this data, proceed as
described in the chapter "Disconnecting
the device and deleting data from the
app".
Reading out the work and
error log
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN (factory setting "1111").
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings".
5. Use the arrow buttons (6) to select "In-
formation".
6. Use the arrow buttons (6) to select "Er-
ror log" or "Work log".
The error and work log can be
read out here.
7. Press the back button (5) to
return to the main menu.
Checking/Performing a
fi rmware upgrade
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN (factory setting "1111").
66
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings".
5. Use the arrow buttons (6) to select "Ver-
sion check".
A check is made to see if a
more recent fi rmware is availa-
ble. If yes, it will be downloaded and
installed automatically.
6. Press the back button (5) to return to the
main menu.

Charging

Do not expose the battery to ex-
treme conditions such as heat and
shocks. There is a risk of injury from
leaking battery fl uid! In case of contact
with eyes or skin, rinse the affected sites
with water or a neutralising agent and
seek medical attention.
Only charge the battery with the
enclosed power adapter or an
approved Parkside X 20 V series
charger.
• Charge the battery before using it for
the fi rst time.
• If the operating time is considerably
shortened despite charging, this shows
that the rechargeable battery is deplet-
ed and must be replaced. Only use an
original battery purchased from custom-
er service.
• Always comply with the latest safety
information, as well as the regulations
and information relating to environmen-
tal protection.
• Defects resulting from improper han-
dling are not covered by the guaran-
tee.