Menu Structure; User Codes - Cosmo Multi 2 Montage- Und Bedienungsanleitung

72
2. Operation and function

2.3 Menu structure

main menu
1.
meas. values
2.
reports
3.
Solar
4.
Arrangement
5.
WMZ
6.
manual operation
7.
user code
8.
Expert
The clear-text display shows a 4-line part of the
selected menu.

2.4 User codes

Adjustment and control of the controller are carried out
via the menu.When the controller is commissioned, the
display level is in the main menu. In the first line of each
submenu you will find the option "back", by means of
which it is possible to get to the former menu level. In
the following diagrams you will find the complete menu
contents; since some of the menu points depend on
the system, option or message, in some cases not all
of the shown text lines are indicated.
Main menu
is shown on the display in the initial state. A
selection can be made between 8 submenus.
Note:
The choice of adjustment values and options depends
on different functions and the user code. Some only ap-
pear in the display if they are available for the adjusted
system parameters.
Code 0262
1. Expert
All menus and adjustment values are
shown and all adjustments can be alte-
red.
Code 0077
2. User
The expert level is shown, parameter
access is restricted.
3. Customer Code 0000
The expert level is not shown, adjust-
ment values (solar) can be changed part-
ly; modification of options, parameter
and balance values is not possible.
For safety reasons, the user code
should generally be set to "0000"
before the controller is handed to
the customer!
Note:
After the menu point "user code" has been choosen,
enter the user code!