Accessory; Temperature Sensors - Cosmo Multi 2 Montage- Und Bedienungsanleitung

6. Accessory

Temperature sensors

sensor in immersion sleeves
flatscrew sensor
Flowmeter
clip-on sensor
Precision-platin sensors PT1000 are used for the con-
troller COSMO Multi.
Depending on the individual solar system, the product
range contains 3 different sensor types: sensors with
immersion sleeves, flatscrew sensors and cylindrical
clip-on sensors.
FK: 1,5 m weather- and temperature resistant silicone
cable for temperatures between -50 °C ... +180 °C, mo-
stly used for collectors.
The V40 is a measuring instrument with for detecting
the flow of water or water/glycol mixtures and is used
in combination with the calorimeter integrated into the
Multi. After a specific volume has passed the V40 reed
switch sends an impulse to the calorimeter.The heat
quantity used is calculated by the calorimeter using
these impulses and the measured temperature diffe-
rence with the help of pre-defined parameters (glycol
type, concentration, heat capacity, etc.).
119