Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
Annex
7.1
Copyright
This document is copyright. All derived rights are also reserved, especially those of translation,
re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar means and
recording in data processing systems, neither partial nor total.
Subject to technical changes without notice.
7.2
Terminology/Glossary
Term
Protective hood
Protective cover
Spark protection
Point angle
Clearance angle
Relief angle
Dead centre
Prism
Cutting edge
7.3
Change information manual
Chapter
4
2
4.2.2
4.3.1
Spare parts
New
4.3.1
CE
parts
4
CE
Spare parts
5 ; 6.2
EN
GH 10T | GH 15T
60
Explanation
Cover of the grinding disc and of the drive shaft.
Protective hood
Cover to protect against sparks when grinding.
Angle of the complete tip of the drill bit
Relief grinding on the drill bit
Clearance angle on the drill bit
Tip of the drill bit
Tool holder
Cutting line of the drill bit
Short note
Adjusting to reduce the chisel edge
Speed GH15T and GH10T after measurement 5000min
Changed wheel max. grinding speed
parts drawing GH15T added
Expanded description, set drills
Expanded description, reduction of chisel edge
GH10T updated layout as GH15T
Possible malfunctions
Setting the reduction of the chisel edge
EMC 2014/30/EU
SDC grinding wheel as optional spare part
Using the different grinding wheels + drill geometry
2015/863/EU
CE update,
Additional spare parts drawing for GH10T
Malfunction due to insufficient cleaning
Originalbetriebsanleitung
new version no.
1.0.1
1.0.2
-1
1.0.3
1.0.3
1.0.4
1.0.5
1.0.6
1.0.7
1.0.8
1.0.9
1.1.0
1.1.1
1.1.2
Version 1.1.4 - 2022-09-23
Annex
Werbung
Inhaltsverzeichnis
