Optimum OPTIgrind GH 10T Betriebsanleitung Seite 51


Again slowly insert the clamping chuck in the opening in order to regrind the second side.
Img.4-6: Regrinding
If everything was done right the result looks as follows: If the drill is seriously damaged it is
necessary to readjust the spiral drill in the adjusting device several times.
Operation
Version 1.1.4 - 2022-09-23
Before
Originalbetriebsanleitung
Clamping chuck
Collet chuck holder
Afterwards
GH 10T | GH 15T EN
51