Operation; Safety; Overview; Application Range Of Coated Grinding Wheels - Optimum OPTIgrind GH 10T Betriebsanleitung

4

Operation

Drill grinding unit with wobble plate on the rotary device for perfect relief grinding.
4.1

Safety

Commission the drill bit grinder only under the following conditions:
The drill bit grinder is in proper working order.

The drill bit grinder is used as intended.

The operating manual is followed.

All safety devices are installed and activated.

All failures should be eliminated immediately. Stop the drill bit grinder immediately in the event
of any failure in operation and make sure that the drill bit grinder can not be started up
accidentally or without authorization.
Notify the person responsible immediately of any modification.
page 38
4.2

Overview

ON/OFF switch
Setting screw
drill diameter
Opening
adjusting device
spiral drill
4.3

Application range of coated grinding wheels

In addition to the classic abrasives corundum and silicon carbide and their further
developments, e.g. zircon corundum, single crystal corundum and SOL-GEL corundum (SG
corundum), the group of CBN and diamond tools for precision machining is becoming
increasingly important. These superhard abrasives are natural and synthetic diamond grits "D"
and synthetic cubic boron nitride (CBN) grits "B".
CBN, the most expensive abrasive ever, is used exclusively for machining hardened steels
(HSS). With the diamond grinding wheel, all other materials, preferably tungsten carbides and
hard materials such as ceramics, glass, carbides, oxides, nitrides, CFRP, GFRP, PCBN, PCD
and diamond themselves, but also various plastics and even rubber can be economically
processed.
EN
GH 10T | GH 15T
46

Qualification of the staff on
Originalbetriebsanleitung
Opening to
reduce the cross
cutting edge
Opening to regrind
spiral drills
Setting
point angle
Operation
Version 1.1.4 - 2022-09-23