Declaration Of Conformity (Doc); Cleaning And Maintenance - Reely GY4 Bedienungsanleitung

Briefly check the vehicle function to see if it responds correctly to the transmitter control signals (steering and
motor/drive).
You can now enable or disable the gyro as needed. Please refer to section 11.1.
Disconnect the receiver from the voltage/power supply and switch off the model vehicle.
Then switch off the transmitter.
You can now put the receiver back in place, e.g. in the vehicle's receiver box. The receiver must be positioned
horizontally, with the sockets/plugs facing upwards, and the lateral orientation is irrelevant. Guide the antenna
cable out of the receiver box. Stow the remaining cables in the receiver box and close it again, taking care not to
pinch any cables when screwing it shut.
The receiver must be positioned horizontally in the vehicle to ensure the correct operation of the built-in
gyro.
Now you can turn on the transmitter again and operate the vehicle.

14 Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the
2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number in the search box. You can then
download the EU declaration of conformity in PDF format.

15 Cleaning and maintenance

This product does not require maintenance. Use a dry, lint-free cloth for occasional cleaning.
Never use aggressive cleaning agents, rubbing alcohol or other chemical solutions, as these may cause discoloura-
tion or damage to the case.
45