Receiver Pin Assignment - Reely GY4 Bedienungsanleitung

9.2

Receiver pin assignment

A "AUX2" connection for the auxiliary control channel (see section 10.15)
B "AUX1" connection for the auxiliary control channel (see section 10.14)
C "THR" connection for the speed controller/throttle servo
D "STR" connection for the steering servo
E "BATT" connection for external power supply (e.g. for the battery box for a
combustion engine vehicle)
F LED (on the side; the LED light is also visible from above between the
connection sockets).
G Antenna cable
Figure 2
33