Inhaltsverzeichnis
Werbung
DESCRIPTION
Conveyor belt R
Conveyor belt
feeding unit B
Working units S belts
Table lifting unit F
Table lifting unit chain H
Compressed air regulator
I
Working unit brakes T
Safety and emergency
devices (Para. 2.7.)
Sanding belt A
Motor-driven rubber roller E Visual check of the rubber 500 h
Antifriction cloth Z
Felt P
*
CAUTION
Motor-driven rubber roller grind-
ing must be performed by serv-
icing personnel or personnel oth-
erwise authorised by the manu-
facturer.
MANUTENZIONE
MAINTENANCE
INSPECTION
Visual inspection
Tensioning and centering
check
Outer visual check
Tensioning and wear
check
Outer visual inspection
Visual inspection
Stretching check
Check bowl and filter
Visual inspection
Visual check and operation 2 weeks
test
Visual check
wear
Visual check
Visual check
INTERVALS
8 h
Weekly
Yearly
400 h
40 h
200 h
40 h
200 h
400 h
40 h
1500 h (or 1 year)
4 h
8 h
400 h
8 h
200 h
7.7
7
OPERATIONS
Clean with a vacuum
cleaner (para. 7.1)
Clean with a solution of
water and alcohol (para. 7.3.)
Adjust (para. 7.3.)
If necessary, adjust
correctly the conveyor
belt (para. 5.7.)
Clean outer surfaces with
a vacuum cleaner
Tension properly or replace
whenever necessary
(Para. 7.8.-9.3.)
Clean outer surfaces with
the vacuum cleaner
Clean with benzine and
lubricate with CTN oil
(Para. 7.7.)
If need be, stretch the
chain correctly
(Para. 7.4.)
Drain the condensate
possibly present in the bowl
L and clean filter M
with benzine and a
compressed air jet
Check wear on the braking
elements and, if need be,
replace them (Para. 7.10.)
Carry out some stopping
tests (Para. 7.10.)
Clean with a vacuum
cleaner or replace when-
ever necessary (Par. 5.1)
Grind roller
whenever necessary *
Clean through a vacuum
cleaner (Par. 5.2.)
Rplace it if worn-out
(Par. 5.2.)
Clean through a vacuum
cleaner (Par. 5.2.)
Rplace it if worn-out
(Par. 5.2.)
Werbung
Inhaltsverzeichnis
