Warning And Notice Signs En; Emergency Information En; Product Description; Technical Data - Abicor Binzel ABIDRIVE 2 Betriebsanleitung

TIG cold-wire feeder
2.5 Warning and notice signs
The following warning and notice signs can be found on the product:
Symbol
These markings must always be legible. They must not be covered, obscured, painted over or removed.
2.6 Emergency information
In case of emergency, immediately disconnect the following supplies:
• Power
• Gas
Further measures can be found in the operating instructions for the power source or the documentation for
other peripheral devices.

3 Product description

Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorisation.
• The device may only be used by qualified personnel (in Germany, see TRBS 1203).

3.1 Technical data

Fig. 1
Ambient temperature
Relative humidity
Tab. 1
Meaning
Crushing of fingers!
Electrostatic discharge
WARNING
Technical data
Ambient conditions during operation
3 Product description
-10°C to +40°C
Up to 90% at 20°C
EN - 5