Warnings And Notice Signs En; Emergency Information En; Scope Of Delivery - Abicor Binzel ABIDRIVE CW Betriebsanleitung

TIG cold wire feeder
3.2 Warnings and notice signs
The following warnings and notice signs are located on the product:
Symbol
The following symbol is attached to the power supply:
Symbol
These markings must always be legible. They may not be covered, hidden, painted over or removed.
3.3 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Power
• Gas
Further measures can be found in the "Power source" operating instructions or in the documentation of further
peripheral devices.

4 Scope of delivery

• Operating instructions
• ABIDRIVE CW Wire feeding unit
• Wire basket spool holder K300
Tab. 5
The intermediate cable assembly (power source side) and equipment and wear parts must be ordered
separately. The ABIDRIVE CW is initially equipped ex works with combination wire delivery spools
(1.0 / 1.2). Other available wire delivery rolls and order data and part numbers for the equipment and
wearing parts can be found in the current order documents.
The contact for consulting and ordering can be found on the Internet at www.binzel-abicor.com.
Meaning
Read and observe operating instructions!
Warning against risk of crushing on rotating rollers!
Meaning
Caution, hazard due to electrical power!
Scope of delivery
4 Scope of delivery
• TIG cold wire feeder
• ABIDRIVE CW Power supply
• Wire delivery rolls 1.0 / 1.2
EN - 7