Driver Installation; Sound Device Settings - Interacoustics Callisto Gebrauchsanweisung

2.6

Driver installation

Now that the Callisto™ Suite sof tware is installed, you must install the driver f or the Callisto™.
1. Connect the Callisto
2.
The system will now automatically detect the hardware and a pop- up will appear on the task bar
near the clock indicating that the driver is installed and the hardware is ready f or use.
3. To f inalize the installation process, start the Callisto™ Suite. Select the desired Regional settings
and Language when the pop-up below appears.

2.6.1 Sound device settings

If the sound card has not been correctly conf igured during the installation, the dialog below will appear the
f irst time you open the Callisto
device f rom the list of click "Set as def ault sound device". Af ter automatically setting the def ault sound device
you must restart the suite f or the changes to take ef f ect.
For manual setup click "Show guide to set the sound device manually". Now select "Video instructions" or
"Written instructions" depending on your pref erence and f ollow the instructions to change the sound card
settings.
Callisto™ – Instructions for Use - EN
TM
hardware to the PC via the USB connection.
TM
Suite. To automatically setup your sound device select your pref erred
Page 14