Installation; Unpacking; Mechanical Mounting - HYDAC International ContaminationSensor CS 1000 Serie Betriebs- Und Wartungsanleitung

ContaminationSensor CS

6 Installation

For operation the CS must be hydraulically (see section 6.3) and electrically (see section 6.4)
installed.
6.1

Unpacking

The CS comes packed in a cardboard box.
Unpack the unit and check it for damage in transit. Report any damage to the forwarding
agent immediately. Check for scope of delivery, see section 4.
6.2

Mechanical Mounting

The CS 1000 can be installed in any position. When selecting the installation site, check
compatibility with the specified ambient data of the CS like the temperature, dust, water or
moisture. The CS features a protection rating of IP 67 according to DIN 40050 / EN60529 /
IEC 529 / VDE 0470.
Depending on the respective model, the CS 1000 can be mounted as follows:
1. Wall mounting: using 2 cylindrical screws
featuring an M8 hexagonal socket, minimum
length: 40 mm, according to ISO4762.
2. Console mounting: using 4 cylindrical screws
featuring an M6 hexagonal socket according
to ISO4762.
HYDAC Filtertechnik GmbH
BeWa CS1000 3247149-02j en.doc
All manuals and user guides at all-guides.com
en
Installation and Operation
Page 88
2006-01-04