Description - HYDAC International ContaminationSensor CS 1000 Serie Betriebs- Und Wartungsanleitung

ContaminationSensor CS

5 Description

The Contamination Sensor CS 1000 Series is a stationary measurement unit for the
continuous monitoring of particulate contamination in hydraulic and lubrication systems.
The CS is designed for connection to low- or high-pressure hydraulic and lubrication lines
from which a small flow of oil (between 30 ml/min and 300 ml/min) is diverted for
measurement purposes. The contamination sensor is suitable for pressure ranges of 0-100
bar and viscosities up to 1000 mm²/s.
Particulate contamination is detected using an optical measurement cell.
Measurement results can be output as a contamination code according to ISO 4406 : 1999
or SAE AS 4059 (D) (cleanliness classes: >4 µm( c) >6 µm( c) >14 µm( c)>21 µm( c)).
The sensor is available with the following options:
•
with or without 6-digit display and keypad (the display can be rotated by 270°) — see
section 6.2.1 )
•
with a 4 ... 20 mA or 0 ... 10 V analog output
•
pipe / hose mounting or flange mounting (see section 5.3.1 or 5.3.2)
All models feature an analog electric output and an RS485 interface for outputting the
measured contamination levels. Additionally, an electronic switching output can be
configured to alert the operator about rising or falling contamination levels.
HYDAC Filtertechnik GmbH
BeWa CS1000 3247149-02j en.doc
All manuals and user guides at all-guides.com
en
Installation and Operation
Page 85
2006-01-04