Contamination Control Software 1000 (Cocos 1000); General Remarks; System Requirements; Adaptor Box - Driver Installation - HYDAC International ContaminationSensor CS 1000 Serie Betriebs- Und Wartungsanleitung

ContaminationSensor CS 1000
13

Contamination Control Software 1000 (CoCoS 1000)

13.1

General Remarks

The CoCoS1000 PC-software package is freeware.
The software is supplied on a CD with the Contamination Sensor Interface CSI-D-5
(p/no.: 3249563).
13.2

System Requirements

Pentium processor 200 MHz or higher
Operating system: Windows 98SE, 2000, ME, XP
128 MB RAM
VGA graphic card with a resolution of 800x600 or higher
Color monitor with a resolution of 800x600 or higher
Hard disk with a minimum of 75 MB free disk space
Microsoft Windows-compatible mouse
One unused USB port
In order to install the software, you must have administrator rights or rights
enabling you to install the software in an unimpeded manner.
13.3 Adaptor Box — Driver Installation
Before installing the software package, the CSI-D-5 must be installed.
1) Connect the CSI-D-5 to the CS1000 and to the power supply as shown in chapter 12.
2) Connect the adaptor box to your PC via the USB cable. Your PC shows you the new
hardware.
If you do not have a driver installed, your PC will ask you to insert a driver CD.
HYDAC Filtertechnik GmbH
BeWa CS1000 3247149-02j en.doc
All manuals and user guides at all-guides.com
en
CoCoS 1000
Page 117
2005-11-03