Basic Symbols; Proper/Designated Use; Improper Use; Safety Devices - HYDAC International ContaminationSensor CS 1000 Serie Betriebs- Und Wartungsanleitung

ContaminationSensor CS

Basic Symbols

1.2.1
This symbol designates safety instructions whose non-observance may
pose a hazard to individuals.
This symbol designates safety instructions whose non-observance may
result in the injury of individuals by electric shock.
This symbol provides important instructions and tips for the proper
handling and operation of the CS.
Non-adherence to these instructions may result in damage to the CS or in
damage to its immediate surroundings.
This symbol designates tips for usage and other particularly useful
information.
This information helps you to optimally utilize all the features offered by
your CS.
1.3

Proper/Designated Use

The Contamination Sensor (CS) was developed for the continuous monitoring of particulate
contamination in hydraulic systems.
Analyzing the size and quantity of contamination enables quality standards to be verified and
documented and the requisite optimization measures to be implemented.
Any other use shall be deemed to be improper and not in keeping with the product
designated use. The manufacturer will not assume any liability for any damage resulting from
such use.
Proper or designated use of the product extends to the following:
•
Maintaining adherence to all the instructions contained herein.
•
Performing requisite inspection and maintenance work.
1.4

Improper Use

•
Any use deviating from the proper/designated use described above is prohibited.
•
Improper use may result in hazard to life and limb.
•
Example of improper use:
•
improper connection of the ContaminationSensor pressure and return flow lines.
1.5

Safety Devices

•
Prior to starting up the product each time, make sure that all the safety devices are
properly fitted to the hydraulic system in which the product is to be used and are in
proper working order.
•
Safety devices may not be removed until the product has been shut down and
secured against being restarted (e.g. warning sign or padlock on the main switch).
•
When the product is supplied in partial consignments, the safety devices are to be
applied by the operator as specified by law/pertinent regulations.
HYDAC Filtertechnik GmbH
BeWa CS1000 3247149-02j en.doc
All manuals and user guides at all-guides.com
en
General Safety Precautions
Page 78
2004-07-12