ContaminationSensor CS
2 Transportation, Packing, Storage
2.1
Transportation & Packing
•
The CS comes wrapped/packed in a cardboard box.
•
When receiving and unpacking the unit check it for damage in transit. Report any
damage to the forwarding agent immediately.
2.2
Storage
•
Make sure to store the CS in a clean, dry place, in the original packing, if possible. Do not
remove the packing until you are ready to install the unit.
•
If the CS is to be put into storage for an extended period of time, it should be completely
drained (if necessary, it should be flushed, using n-heptane) so as to prevent it from
gumming up.
•
Any cleaning agents and flushing oils used are to be handled and disposed of properly.
Storage conditions
2.2.1
Storage temperature:
Relative humidity:
3 Model code / Product identification
For product identification details see the Model code label. This is bonded on top side and
contains the exactly Product description as soon as serial-no.
1
2
3
Line
Definition
HYDAC Filtertechnik GmbH
BeWa CS1000 3247149-02j en.doc
All manuals and user guides at all-guides.com
-40°C ... +80°C / -40°F ... + 176°F
max. 90%, non-condensing
5
25 A
Description
en
Packing, Transportation, Storage
000001
Page 82
2005-11-10