Modes And Menus; Power Up Menu - HYDAC International ContaminationSensor CS 1000 Serie Betriebs- Und Wartungsanleitung

ContaminationSensor CS
The keypad consists of six keys. These keys are used to operate the CS and to navigate
through the menus (hierarchically structured).
Keypad buttons Description
- one level down
- confirm changed value (lowest level)
- confirm when changes are to be saved or cancelled (top level)
- one level up
no value change
-
change value at the lowest level (when display is blinking)
-
- scroll through display
scroll through menu
-
- select digit
8.2

Modes and Menus

The sensor features two operating modes, each mode with a menu of its own:
Mode Menu
Power up mode

Power Up menu

Measuring mode Measuring menu
Power Up Menu
8.2.1
The Power Up menu is for the basic settings.
Selection
Enter Power up menu
Exit menu without saving changes
Exit menu and save changes
Power Up Menu:
HYDAC Filtertechnik GmbH
BeWa CS1000 3247149-02j en.doc
All manuals and user guides at all-guides.com
Description
Starts by pressing and holding any button
while supplying voltage to the sensor
For basic settings
Starts automatically after powering up
Shows continuously measured values
How
Press any button and hold it down while switching
on the supply voltage
CANCEL
Scroll to
automatically after 30 s without any action
SAVE
Scroll to
MODE
mTIME
pPRTCT
en
Installation and Operation
and press
and press
Description
Select measuring mode
Set measuring time
Set time for pump protection
Page 97
2006-01-04