Fluid Flow Rate (Flow); I/Flow Rate Analog Output Characteristic - HYDAC International ContaminationSensor CS 1000 Serie Betriebs- Und Wartungsanleitung

ContaminationSensor CS
Fluid Flow Rate (
9.1.4
The flow signal corresponds to the measured flow rate through the unit.
9.1.4.1

I/Flow rate analog output characteristic

Current I
I < 4.0 mA
4.0 mA < I < 4.1 mA
4.1 mA < I < 4.3 mA
4.3 mA < I < 4.5 mA
4.5 mA < I < 4.8 mA
I = 4.80 mA
I = 5.33 mA
I = 5.87 mA
I = 6.40 mA
I = 6.93 mA
I = 7.47 mA
I = 8.00 mA
I = 8.53 mA
I = 9.07 mA
I = 9.60 mA
I = 10.13 mA
I = 10.67 mA
I = 11.20 mA
I = 11.73 mA
I = 12.27 mA
I = 12.80 mA
I = 13.33 mA
I = 13.87 mA
I = 14.40 mA
I = 14.93 mA
I = 15.47 mA
I = 16.00 mA
HYDAC Filtertechnik GmbH
BeWa CS1000 3247149-02j en.doc
All manuals and user guides at all-guides.com
FLOW
)
Description
Cable break
Device error, device not ready
Not defined
Flow error (flow too low)
Not defined
30 ml/min
40 ml/min
50 ml/min
60 ml/min
70 ml/min
80 ml/min
90 ml/min
100 ml/min
110 ml/min
120 ml/min
130 ml/min
140 ml/min
150 ml/min
160 ml/min
170 ml/min
180 ml/min
190 ml/min
200 ml/min
210 ml/min
220 ml/min
230 ml/min
240 ml/min
en
Installation and Operation
Page 110
2006-01-04