Herunterladen Inhalt Inhalt Diese Seite drucken

Microtronics myDatalogEASY IoTmini Benutzerhandbuch Seite 150

Inhaltsverzeichnis

Werbung

native Float:asin(Float:x);
arcsin(x) im Bereich [-π/2, π/2], x Element von [-1, 1]
native Float:acos(Float:x);
arccos(x) im Bereich [0, π], x Element von [-1, 1]
native Float:atan(Float:x);
arctan(x) im Bereich [-π/2, π/2]
native Float:atan2(Float:y, Float:x);
arctan(y/x) im Bereich [-π, π]
native Float:sinh(Float:x);
Sinus Hyperbolicus von x
native Float:cosh(Float:x);
Cosinus Hyperbolicus von x
native Float:tanh(Float:x);
Tangens Hyperbolicus von x
native Float:exp(Float:x);
Exponentialfunktion e
native Float:log(Float:x);
natürlicher Logarithmus ln(x), x > 0
native Float:log10(Float:x);
Logarithmus zur Basis 10 log
native Float:pow(Float:x, Float:y);
y
x
. Ein Argumentenfehler liegt vor bei x = 0 und y <= 0, oder bei x < 0 und y ist nicht ganzzahlig.
native Float:sqrt(Float:x);
Wurzel x, x >= 0
native Float:ceil(Float:x);
kleinster ganzzahliger Wert, der nicht kleiner als x ist
native Float:floor(Float:x);
größter ganzzahliger Wert, der nicht größer als x ist
native Float:fabs(Float:x);
absoluter Wert | x |
native Float:ldexp(Float:x, n);
n
x*2
native Float:frexp(Float:x, &n);
zerlegt x in eine normalisierte Mantisse im Bereich [1/2, 1], die als Resultat geliefert wird, und eine
Potenz von 2, die in n abgelegt wird. Ist x null, sind beide Teile des Resultats null.
native Float:modf(Float:x, &Float:ip);
zerlegt x in einen ganzzahligen Teil und einen Rest, die beide das gleiche Vorzeichen wie x besitzen.
Der ganzzahlige Teil wird bei ip abgelegt, der Rest ist das Resultat.
native Float:fmod(Float:x, Float:y);
Gleitpunktrest von x/y, mit dem gleichen Vorzeichen wie x. Wenn y null ist, hängt das Resultat von der
Implementierung ab.
native isnan(Float:x);
liefert einen Wert ungleich Null, wenn x "not a number" ist
150
x
(x), x > 0
10
Rev. 02

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis