ATTENTION!
The emergency switching off push button immediately stops the operation of the
drilling- milling machine.
Press the emergency switching off push button only if there is a risk! If this push button
is actuated in order to switch off the drilling- milling machine in the standard operation
the tool or workpiece might get damaged.
After having actuated the emergency switching off push button, turn the knob to the
right in order to restart the machine.
1.9.2
Protective cover
The drilling / milling head is equipped with
a protective cover.
WARNING!
Only remove the protective cover
when the mains plug of the drilling-
milling machine is disconnected.
1.9.3
Lockable master switch
The lockable master switch can be secured in the "0" position by means of a padlock to guard
against the milling machine being switched on accidentally or by an unauthorised person.
The power supply is cut off when the master switch is in the off position.
Except for the areas marked by the pictogram in the margin.
WARNING!
Dangerous voltage even if the main switch is switched off. The areas marked by the
pictogram might contain live parts, even if the main switch is switched off.
EN
MB4
56
Protective cover
Translation of original instruction
Img.1-3:
Protective cover
Version 1.0.1 - 2021-11-18