Inhaltsverzeichnis
Werbung
4.2
Safety
The drilling- milling machine must only be operated under the following conditions:
The drilling- milling machine is in proper working order.
The drilling- milling machine is used as intended.
The operating manual is followed.
All safety devices are installed and activated.
Eliminate or have all malfunctions rectified promptly. Stop the drilling and milling machine
immediately in the event of any abnormality in operation and make sure it cannot be started up
accidentally or without authorisation.
For your own safety during operation on page 58
4.3
Switching on the drilling-milling machine
Select the gear stage.
Select the motor stage.
Press the button "Control On".
Press the desired spindle rotation direction.
4.3.1
Speed table 400V three-phase drive
Gear stage
Motor stage
4.3.2
Speed table 230V
Getriebestufe
EN
MB4
68
Img.4-1:
Speed table 400V
Img.4-2:
Speed table 230V
Translation of original instruction
Version 1.0.1 - 2021-11-18
Werbung
Inhaltsverzeichnis
