Changing Transmission Channel; Changing Control Panel Brightness; Displaying Supply Voltage - ARB ELEMENTS Bedienungs- Und Serviceanleitung

6.8 Changing transmission channel

Your ARB fridge can be used with the ARB wireless fridge display (sold separately) that
has the choice of 4 transmission channels.
To change the transmission channel:
 Open lid and turn fridge on.
 Press
four times to display current transmission channel (eg
 Press
or
 After 5 to 6 seconds of inactivity, the display will flash and return to displaying the
current cabinet temperature.
Refer to instructions provided with the ARB wireless fridge display for information about
its installation and use.

6.9 Changing control panel brightness

The brightness of the control panel display on your ARB fridge is adjustable.
To change the brightness of the control panel display:
 Open lid and turn fridge on.
 Press five times to display
 Press
or
 After 5 to 6 seconds of inactivity, the display will flash and return to displaying the
current cabinet temperature.

6.10 Displaying supply voltage

Your ARB fridge can display the voltage being supplied to your fridge.
To display the supply voltage:
 Open lid and turn fridge on.
 Press
to display supply voltage.
When connected to DC power, the supply voltage will be shown
When connected to AC power, 'AC' will be displayed
to change between Ch1, Ch2, Ch3 and Ch4.
to change between the two brightness levels.
).
14