Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting The Irrigation Handle; Start-Up; Raccord De La Poignée De Rinçage; Mise En Service - ATMOS Variotherm plus Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Variotherm plus:
Inhaltsverzeichnis

Werbung

3.0

3.3.5 Connecting the irrigation handle

Insert a "three-holes gasket" (
barrelled hose and screw it (
connection (
, fi g. 3).
Use only "three-holes gaskets" or the unit will not
function correctly!
Insert a "three-holes gasket" in the irrigation handle and
screw it on the free end of the double-barrelled hose.
Open the water-tap.
Check whether all connections are tight.
3.4

Start-up

Insert the handle in its holder; the jet must point to the
reverse side of the unit.
Switch on the unit (
The unit will display a test mode with digital numbers
" 8 8"and an audible signal.
Automatic activation of the thermal process will begin for
reducing bacterial count.
Duration: 5 min.
When the thermal process is complete , the unit will switch
to the irrigation mode (37°C).
When the irrigation mode is not used (handle is not
removed from its support) the unit change into the energy
saving mode after 5 min.
, fi g. 4) in the double-
, fig. 4) on the unit
, fi g. 1).
UK
3.3.5 Raccord de la poignée de rinçage
Visser le "tube double" (
"garniture en place à trois trous" (
le raccord d'appareil (
N'utiliser que des "garnitures à trois trous", car
l'appareil ne fonctionne pas bien autrement!
Visser la poignée de rinçage avec la garniture à trois
trous" en place" sur l'extrémité libre du tuyau double.
Ouvrez le robinet.
Vérifi ez si toutes les jonctions sont étanches.
3.4

Mise en service

Accrocher la poignée dans la fi xation de sorte que la
buse de rinçage indique dans le sens de la face arrière
de l'appareil.
Mettre l'appareil en marche (
Test automatique d'affi chage avec suite numérique de
chiffres «8 8» et signal d'avertissement acoustique.
Activation automatique du processus thermique de
réduction de l'indice de germination.
Durée: 5 minutes.
Changement automatique au mode de rinçage (37°C).
En cas de non utilisation du mode rinçage dans l'espace
de 5 min. (la poignée n'est pas prise de la fi xation) change-
ment automatique en mode de réduction d'énergie.
, illustration 4) avec une
, illustration 4) sur
, illustration 3).
, illustration 1).
F
25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis