vacuum cleaners.
Removing the external
dust extraction:
1. Disconnect the suction tube
from the adapter for external
dust extraction (8).
2. Open the four fasteners (9)
on the adapter for external
dust extraction (8).
3. Remove the front and rear
part of the adapter for exter
nal dust extraction (8).
Operation
Switching on and off
1. To switch the device on,
press the on/off switch (1).
2. To switch the device off,
press the On/Off switch (1).
Practical tips
When working with
the appliance, al-
ways wear suitable
clothing and ap-
propriate protective
equipment.
Prior to each use
it must be ensured
that the appliance
is working correct-
ly.
Personal protective
equipment and a
fully functional ap-
pliance reduce the
risk of injuries and
accidents.
Do not use the device
without external dust
extraction. Use of dust
extraction can reduce
hazards caused by
dust.
Make sure that the work
place is well ventilated.
Sanding
• Move the appliance against
the workpiece once it is
switched on.
• After machining, lift the
sanding disc up before turn
ing off the device.
• Clean the sanding plate be
fore you attach a sanding
sheet.
GB
IE
49