Trouble Shooting; Error Correction - Parkside PMDSA 4 A1 Originalbetriebsanleitung

GB IE

Trouble Shooting

Problem Possible Cause
Mains voltage missing
Main circuit breaker is
Device
tripped
doesn't
start
On/off switch (
may be defective
Motor faulty
Device
Internal loose contact
works
On/off switch (
with inter­
ruptions
is broken
Motor is
slowing Device is overloaded
through workpiece
down
and stops
Sanding sheet (5)un­
suitable for the work­
Poor
piece to be processed
grinding
perfor­
mance
Worn sanding sheet
Sanding sheet (5)un­
Sanding
suitable for the work­
sheet
piece to be processed
(5) wears
Too much pressure
down
applied
quickly
56

Error correction

Check the socket, mains ca­
ble, line, mains plug, repairs
to be carried out by qualified
electrician if necessary,
check main circuit breaker.
1)
Repair by Customer Care
Repair by Customer Care
1)
Reduce pressure on sander
Workpiece unsuitable
Use a suitable sanding sheet
(5) (see "Selecting a san­
ding sheet")
Insert a new sanding sheet
(see "Attaching/removing
sanding sheet")
Use a suitable sanding
sheet (5) (see "Selecting a
sanding sheet")
Reduce the pressure