GB
IE
• Only work with sanding
sheets in perfect condition
to achieve good sanding
results.
• Work with low and even
pressure on the hand rest (
2) and even forward
pressure. This protects the
appliance and the sanding
sheet.
• Grind rough corners and
edges with the top or side
edge of the sanding sheet.
If the front tip of the triangu
lar sanding sheet is worn,
the sanding sheet can be
removed, rotated and put
back into place.
• Do not use the same sand
ing sheet to sand different
materials (e.g. metal and
then wood).
• Empty the dust collection
box or the vacuum cleaner
regularly in order to ensure
optimal suction.
• Work with low and even
pressure and even forward
pressure. This protects the
appliance and the sanding
sheet.
50
• Empty the vacuum cleaner
regularly in order to ensure
optimal suction.
Selection of sanding
sheet
Grain size Application
for presanding
P 80
rough wood sur
faces
P 180
for plain sanding
for fine sanding of
P 320
primed and painted
surfaces
Cleaning/
Maintenance
Repair and servicing
work not described
in this manual should
always be carried by
our Service Centre. Use
only original parts.
The following cleaning and
servicing should be done reg