Residual Risks - Parkside PMDSA 4 A1 Originalbetriebsanleitung

Warning! Sanding
can result in the
formation of haz-
ardous dusts (e.g.
metals or some
wood types) which
can present a haz-
ard to the operator
or persons in the
vicinity. Make sure
that the workplace
is well ventilated.
Always wear safe-
ty goggles, safety
gloves and respira-
tory protection.
• Secure the work-
piece. A workpiece that
is retained with clamping
appliances or a vice is held
more securely than with
your hand.
• Only use the power
tool for dry sanding.
Avoid using on damp
materials. Penetration of
water into the power tool
increases the risk of electric
shock.
• Avoid overheating the
sanded object and the
sander itself. Possible fire
hazard.
• The workpiece gets
hot during grinding.
Do not touch the ma-
chined area, allow it
to cool down. There is a
risk of burning. Do not use
coolants or the like.

Residual risks

Even if properly operating and
handling this electric tool, some
residual risks will remain. Due
to its construction and build,
this electric tool may present
the following hazards:
a) Lung damage, if suitable
respiratory protection is not
worn;
b) Cuts
c) Ear damage if working
without ear protection.
d) Eye damage if suitable eye
protection is not worn.
e) Damage to your health
caused by swinging your
hands and arms when op­
erating the appliance for
GB IE
43