General Safety Instructions; Safe Operation - Parkside PNTS 250 B1 Originalbetriebsanleitung

All manuals and user guides at all-guides.com

General safety instructions

instructions refers to mains-operated electric
tools (with a mains cable) and to battery-op-
erated electric tools (without a mains cable).

Safe operation:

Keep work area clear. Cluttered
•
areas and benches invite injuries.
Consider work area environment.
•
- Do not expose tools to rain. Do not
use tools in damp or wet locations.
Water entering a power tool will in-
crease the risk of electric shock.
- Keep work area well lit.
- Do not use tools in the presence of
Power tools create sparks which may
ignite the dust or fumes.
Guard against electric shock.
•
Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radia-
tors, ranges, refrigerators).
Keep other persons away.
•
Do not let persons, especially children,
not involved in the work touch the tool
or the extension cord and keep them
away from the work area.
Store idle tools. When not in use,
•
tools should be stored in a dry locked-
up place, out of reach of children.
Do not force the tool.
•
the job better and safer at the rate for
which it was intended.
Use the right tool.
•
- Do not force small tools to do the job
of a heavy duty tool.
- Do not use tools for purposes not
intended; for example do not use cir-
cular saws to cut tree limbs or logs.
Use of the power tool for operations dif-
ferent from those intended could result
in a hazardous situation.
Dress properly.
•
- Do not wear loose clothing or jewel-
- Anti-slip footwear is recommended
- Wear protective hair covering to con-
Use protective equipment.
•
- Use safety glasses.
- Use face or dust mask if working op-
Connect dust extraction equip-
•
ment.
connection of dust extraction and col-
lecting equipment, ensure these are con-
nected and properly used.
Do not abuse the cord. Never
. •
yank the cord do disconnect it from the
socket. Keep the cord away from heat,
oil and sham edges.
Secure work. Where possible use
•
safer than using your hand.
Do not overreach. Keep proper foot-
•
ing and balance at all times.
tool in unexpected situations.
Maintain tools with care.
•
maintained power tools.
- Keep cutting tools sharp and clean for
- Follow instruction for lubricating and
- Keep handles dry, clean and free
Disconnect tools. When not in use,
•
before servicing and when changing
G B
lery, they can be caught in moving
parts.
when working outdoors.
tain long hair.
erations create dust.
better and safer performance.
changing accessories.
damaged have them repaired by an
authorized service facility.
and replace if damaged.
from oil and grease.
I E N I
.
9