Spare Parts - BACHTENKIRCH Tracy Montage- Und Betriebsanleitung

Spare parts

Damaged parts must be replaced immediately!
Deformed parts should not be straightened under any circumstances, as this increases the hazard of breaking.
All worn out parts such as tyres and brake pads must be replaced immediately.
Tyres, tubes and rim dimensions must match. Always ensure the proper fit of tubes and tyres. Only use identically marked tyres
and tubes for your replacement parts. Brake pads (as of 2.5 mm profile) should always be replaced on both sides. To avoid
impairing the braking functionality, when replacing the brake linings please ensure that they are especially suited for aluminium
rims. When replacing brake cables , only bike brake cables that fit the brake shell may be used.
You can obtain the suitable spare parts at specialist shops.
Technical specifications
Permissible total load: a maximum of 50 kg!
The luggage rack is designed for a maximum load of 20 kg.
Torque for screw connections:
Wheel nut in front:
Rear:
30 Nm Pedals:
17 Nm Handlebar stem and
handlebar clamp:
5-6 Nm Saddle post:
General screws:
With M5 thread:
With M6 thread:
With M8 thread:
Tyre pressure
•
12.5" x 2.1/4:
•
14", 16" or 18" x 1.75:
20-25 Nm
30-35 Nm Steel pedal crank:
30 Nm Handlebar screw:
17 Nm Brake pads:
20 Nm
approx. 3 Nm (as reference value)
approx. 5 Nm (as reference value)
approx. 10 Nm (as reference value)
2.0 to 2.5 bar (approx. 30-35 psi)
2.5 to 3.5 bar (approx. 35-50 psi)