Sinmag Europe Creamco 30L Handbuch Seite 35

24 Rotational speed selector
ENG
25 Emergency and main cut-
out
26 Starting switch
27 Temperature controller
30 Light indicator
31 Hand wheel
32 Dispensing tap
8
Used for starting and stopping the mixing tool
motor. Switched to position 1 activates low mixing
tool rotation ; Switched to position 2, activates high
tool rotation. When the switch is in 0 position, the
mixing tool is not moving.
The switch may be set in two positions: 0 – the
machine is stopped; 1 – power is supplied.
Used for starting the machine and for cancelling the
alarm signalling the end of stored mixing time.
Used for setting desired mixing temperature.
Informing that heating time is over
Used for titling the bowl in order to empty it.
Used to discharge the bowl without tilting