Sinmag Europe Creamco 30L Handbuch Seite 34

Item Part
1 Frame
2 Top cover
3 Bowl cover
3a End connector key
4 Bowl with oil shell
9 Back cover
9a Heater
9b Washer
9c Sleeve nut
9d Seal
10 End connector
12 Mixer lock
13 Drive shaft
14 Mixing tool
15 Threaded rod
16 Electric cabinet
17 Reducer
18 Two-gear motor
19 Time relay
20 Emergency switch
21 Mixing tool connector (Start/
Stop)
22 Heaters connector
23 Signal light
Description
While the machine is in operation, the bowl must be
closed with a cover, and its key must be pushed into
the end connector.
Made of stainless steel, used as a product heater
and a tank.
Prevents access to heaters
Heats thermal oil of the mixing tool in the oil shelve
(4)
Used for fixing the back cover (9)
Prevents machine operation when the key (being an
integral part of the cover (3)) is not pushed properly.
Connects the drive shaft (13) with the mixing tool
(14), enabling drive transmission. To remove the
mixing tool the lock should be turned upwards
Used for mixing various ingredients. Made entirely
of stainless steel.
Used for fixing the back cover with nuts (9c)
Used for setting the time of bowl heating.
Stops the machine in emergency.
Starting or stopping mixing operation.
For starting or switching off bowl heaters. The
heaters operation is signalled by the connector
lighting in red.
Indicates power supply connection
ENG
7