HERON 8896230 Bersetzung Der Ursprünglichen Bedienungsanleitung Seite 107

SPECIFICATIONS OF THE TOOLS USED FOR THE ANGLE GRINDERS
Angle grinder Extol® Premium 8892021
Grinding disc: Ø 115 mm, th. 6.6 mm, 144 g
Diamond cutting disc: Ø 115 mm, 102 g
Angle grinder Extol® Craft 403126
Grinding disc: Ø 125 mm, th. 6.6 mm, 172 g
Diamond cutting disc: Ø 125 mm, 120 g
Angle grinder Extol® Industrial 8792014
Grinding disc: Ø 125 mm, th. 6.6 mm, 172 g
Diamond cutting disc: Ø 125 mm, 120 g
Angle grinder Extol® Premium 8892018
Grinding disc: Ø 150 mm, th. 6.6 mm, 242 g
Diamond cutting disc: Ø 150 mm, 194 g
Angle grinder Extol® Premium 8892020
Wire brush: Ø 10 cm, rpm 7000 min
Diamond disc: Ø 230 mm, 546 g
y To illustrate power input under very intensive loads,
the task of "grinding asphalt" with a wire cup brush was
selected since it results in high friction, which increases
power input.
y In table 2, for the purpose of comparison of power input
with larger angle grinders, for illustration angle grinders
Extol® Premium 8892021 and Extol® Craft 403126 were
used with a braided cup brush of diameter 85 mm,
OVERVIEW OF POWER INPUTS ON OTHER ELECTRIC POWER TOOLS
AND THE MINIMUM REQUIRED ELECTRICAL POWER OUTPUT OF THE GENERATORS
COMPRESSORS
Two-cylinder compressor Extol® Craft 418211
(2 200 W, pressure vessel 50 l)
y Starting power input and current: 2800 W; 12.3 A
y Power input when pressurising the vessel at a pressure of 3 bar: 1900 W
y Power input when pressurising the vessel at a pressure of 8 bar: 2270 W
y Power input when grinding with a pneumatic random orbital sander: 2200 W
(equilibrium pressure of 4 bar)
Single-cylinder compressor Extol® Craft 418210
(1 500 W, pressure vessel 50 l)
Oil free compressor Extol® Craft 418101
(1 100 W)
HIGH PRESSURE WASHER
High pressure washer Extol® Premium 8895200
(1800 W, max. 140 bar)
y Starting/operating power input: 1630 W/1500 W
High pressure washer Extol® Industrial 8795200
(3 000 W, max. 180 bar)
y Starting/operating power input: 2650 W/2550 W
107
1)
2)
3)
1)
2)
3)
Braided cup brush: Ø 80 mm, 374 g
Braided cup brush: Ø 80 mm, 374 g
, 860 g Grinding disc: Ø 230 mm, th. 6 mm, 566 g
-1
y Table 3 then shows an overview of the specified power
Braided cup brush: Ø 65 mm, 196 g
Grinding metal at appropriate load: yes
Braided cup brush: Ø 80 mm, 374 g
Braided cup brush: Ø 65 mm, 196 g
Grinding metal at appropriate load: yes
Braided cup brush: Ø 80 mm, 374 g
which is, nevertheless, too heavy for these angle grin-
ders and it is not permitted to use these angle grinders
with this brush as this would result in damage to the
angle grinder. These angle grinders must be used with
cup brushes of diameter 65 mm.
inputs on other electric power tools.
Minimum electrical power output of the generator
Generator Heron® 8896413
(5.0 kW; Max. 5.5 kW)
y Heron® 8896140 (3.0 kW; Max. 3.5 kW) can not be used
Generator Heron® 8896416
(2.5 kW; Max. 2.8 kW)
y Heron® 8896411 (2.0 kW; Max. 2.3 kW) can not be used
Digital generator Heron® 8896217
(1.6 kW; Max.2.0 kW)
Minimum electrical power output of the generator
Digital generator Heron® 8896217
(1.6 kW; Max.2.0 kW)
Generator Heron® 8896413
(5.0 kW; Max. 5.5 kW)
y Heron® 8896140 (3.0 kW; Max. 3.5 kW) can not be used
Table 2 (continued)
Table 3
EN