Scope Of Delivery; Technical Design; Spray Gun - SATA SATAjet 1000 H RP Betriebsanleitung

Operating Instructions SATAjet 1000 K (RP / HVLP) / H (RP)
Weight | Version
SATAjet 1000 H suction cup 1000
ml
3.

Scope of Delivery

■ Spray gun with nozzle set RP / HVLP
■ Tool kit
■ CCS clips
■ Operating Instructions
■ Aluminium suction cup 1000 ml*
■ Paint sieve*
■ Drip-stop*
*only with SATAjet 1000 H RP
After unpacking, check:
■ Spray gun damaged
■ Complete scope of supply
4.

Technical Design

4.1. Spray gun

Round / flat fan control
[1-1]
Material flow control
[1-2]
Counter nut material flow
[1-3]
control
Air micrometer
[1-4]
Air micrometer (air flow
[1-5]
control) locking screw
Air piston (not visible)
[1-6]
Compressed air connection
[1-7]
G ¼ „ (male thread)
ColorCode-System (CCS)
[1-8]
Strainer (not visible)*
[1-9]
[1-10] Suction cup*
*only with SATAjet 1000 H RP
4.2. Air micrometer
[3-25] SATA adam 2 (see
chapter 15)
930 g
[1-11] Anti-drip device (not
visible)*
[1-12] Suction cup lid*
[1-13] Clasp*
[1-14] Suction cup connection*
[1-15] Spray gun handle
[1-16] Trigger
[1-17] Material connection G⅜ „
(male thread)
[1-18] Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
[3-26] Separate pressure gauge
with control device (see
chapter 15)
EN
32.8 oz.
129