MBO Merkura 1050 Gebrauchsanweisung Seite 39

Merkura 1050 GB neu
Activating/
deactivating
the training
zone alarm
C
MHR alarm
Warning
Downloaded from www.Manualslib.com
27.03.2003
USING THE PULSE COMPUTER
In pulse mode, keep pressing key "B" until the
letters ZN are displayed in the centre line of the
display. The current training zone is now dis-
played in the bottom line with the upper and
lower limits.
Press key "C" to switch the alarm on or off for
the relevant training zone. If the training zone
alarm is activated, the alarm icon
the display. The pulse computer will now let you
Z
know:
O
N
E
• when your pulse rate falls below the preset
• when your pulse rate is above the preset
B
• when your current pulse rate is 99% or more
In order to minimise the risk of injury, if your
pulse rate reaches 99% of your maximum heart
rate (MHR) – or exceeds it – a warning tone
sounds (4 beeps per second).
If the alarm is not enabled (no alarm icon dis-
!
played), only a visual warning occurs (% of MHR
blinks). There is no audible warning if the MHR
is exceeded!
manuals search engine
8:31 Uhr
training zone by beeping once a second.
training zone by beeping twice a second.
of your MHR by beeping four times a second.
Seite 15
15
appears in
www.MBOservice.net